A Toyota vehicle can be an amazing vehicle with lots of features such as automated parallel parking and cameras and sensors in the back to help with reversing. However, a vehicle is a machine that requires regular maintenance and will have problems from time to time. The AWD system breakdown is a regular problem with Toyota automobiles. In this article, we will tell you the possible causes and solutions for the Toyota RAV4 AWD system malfunction 2WD mode engaged.
What Does Toyota RAV4 AWD System Malfunction 2WD Mode Engaged Mean?
5 Issues That Cause The AWD System To Malfunction
Many reasons can trigger a warning for AWD system malfunction 2WD mode engaged warning. Let’s have a look at them:
1. The Gas Cap Is Loose
When the gas cap is cracked or loose, pollutants enter the fuel tank, causing evaporation or reduced mileage. It seems simple, but it is the source of numerous difficulties, including additional system alerts such as a check engine light.
2. Transmission System Problems
The gearbox system is critical for providing additional traction to the four wheels on the road. When this system fails, the vehicle’s four wheels won’t move smoothly. There are various common issues with this part, including fluid leaking, which will compromise the vehicle’s AWD. As a result, you might hear a grinding or clicking sound while driving. The transfer case, which stores the fluid used for gear shifting, is also part of this system. However, changing becomes challenging due to the contaminated fluid.
3. Errors in Speed Sensors
The speedometer displays information about the vehicle’s speed. This information is recognized by the computer system, which uses it to supply RPMs and assist in gear shifting. When driving over a bumpy road or uneven surface, these sensors begin to fail. The car’s traction and stability systems are disabled due to faulty sensors.
Ineffective speed sensors are unable to provide accurate gear changes and speed maintenance indicators. You should not drive it if the AWD is active and the sensors fail due to the loss of traction and stability. Driving on slippery surfaces leads to a loss of traction, wheel instability, reduced tire grip, and an increased risk of an accident.
4. Bad System
The issue comes as a result of the clutch’s outside leaking after using this feature while driving. Another cause that adds to this component’s failure is a faulty differential clutch. Furthermore, improper filling of pumps and valves during replacement affects their performance efficiency.
5. Ignition On
If you follow the correct technique, the ignition system will turn off soon after you start the car. When the AWD warning light illuminates, the system is operational and an error message is displayed. Overheating in the combustion chamber could be the cause of this condition. If the ignition system is always turned on, the engine will misfire and suffer component damage.
Additionally, the leakage of the air/fuel mixture caused by the defective transfer pump results in the light flashing. This prevalent problem is caused by the ongoing burning of the air/fuel mixture in this chamber as a result of overheating. Furthermore, worn-out and damaged spark plugs contribute to the issues.
- Toyota RAV4 Trail Mode
- Check Engine Light Went Off By Itself
- Can I Drive My Car With 0% Oil Life?
- Alternator Fault Battery not charging
How to Fix AWD System Malfunction 2WD Mode Engaged?
There are certain steps that you can take to solve this issue:
1. Check Gas Cap
It is suitable to tighten the gas cap if it’s not properly sealed. After driving approximately 100 miles, the light should turn off automatically. In more critical cases, such as when it is severely damaged and cannot keep the fuel tank sealed, the only choice is to replace it.
2. Check Transmission Issues
This system must be checked frequently. Because its fluid is important, it should be changed at regular intervals to support the engine’s best performance. Also, while it may seem insignificant, make sure to use the right tires. Using ones that don’t match can impact overall efficiency.
3. Check Engine Light
If the AWD malfunction is due to the check engine light then it is crucial to diagnose and fix this issue. Visit the nearest mechanic to check the error codes. This will help you to check the critical issues that need to be addressed.
4. Resolve Speed Sensor Issues
If the speed sensor is the root of the AWD malfunction then it is required to seek professional assistance. The mechanic will recognize the faulty parts and will help to restore the proper functioning of the AWD system.
Is It Safe To Drive With A Faulty AWD System?
AWD caution does not force you to immediately stop driving. In short, you can still drive the vehicle safely, but you must pay closer attention while doing so. it’s important to identify and fix it as soon as possible. Be cautious because your car will react differently than you might think. This is more dangerous when driving in hazardous weather, such as rain or snow, because the AWD alert indicates that the system is faulty and completely disabled.
There could be several issues for the AWD system to fail. It could be a battery problem or several other problems. read this article carefully to learn about the issue.