Imagine driving down a quiet neighborhood in your Kia Sorento, and suddenly, an annoying reverse beep begins blaring. This won’t just be annoying; all the vehicles driving next to you will be annoyed too.
If you’re tired of the sound and want to drive more peacefully, this guide will provide some methods on “How to turn off the reverse beep on Kia Sorento?” I will also list some reasons why this beep sound appears. So, keep reading to find out more about it.
Why Does My Kia Keep Beeping When the Reverse Gear Is Engaged?
Like other modern cars, Kia offers an innovative feature called Reverse Parking Distance Warning (PDW). PDW acts like having another set of eyes to see things you might miss while backing up your car.
Kia cars feature proximity warning beepers to alert drivers when getting close within 120 cm that could pose an immediate danger. The beeping gets louder if your car nears something less than 60 cm away.
However, according to Kia’s website, PDW may misbehave when:
- There is moisture present in the sensor.
- Dirt, debris, and foreign matter have been collected on it.
- You are reversing on uneven ground.
- Rain or water is splashing close by your car.
- Wireless transmitters (such as phones) are near the sensor.
- It has failed and needs a replacement.
How To Turn Off Reverse Beep on Kia Sorento?
If this is your first time hearing your Kia Sorento’s reverse beep and you have no clue how to turn it off, the two simple methods explained below will help you resolve this issue without much hassle.
Method #1: Turning Off Reverse Beep via the Sound System Speaker
The first method you can use to turn off the reverse beep on your Kia Sorento is via the sound system speaker. Here are all the steps you need to go through for this.
Step #1: Switch Off Your Power System
Start by pulling out of your Kia Sorento on the side of the road. Now turn off its engine and open the hood before disconnecting both positive and negative terminals of the battery. Wait for 4-7 minutes before reconnecting both the terminals.
Step #2: Remove the Front Bumper
The next thing to do is to secure the frame using a jack before taking steps to unbolt both sections of the bumper. Any plastic caps securing upper sections must be taken off to free lower sections.
Step #3: Locate Speaker Wires
Locate the wires connected to the battery under door panels or trim pieces that provide access to it.
Step #4: Unplug Sound Cords
Locate and disconnect any wires responsible for the reverse beep. If necessary, seek professional help.
Step #5: Attach Plastic Covers
Use plastic covers to shield open wire ends from heat and moisture exposure.
Step #6: Reinstall Removed Parts
Wedge the bumper back into place using screws and clamps as anchor points before securely tightening all nuts and bolts over its seams.
Step #7: Test Performance
Start the SUV, move to an isolated area, and check for persistent beeping sounds.
Method #2: Turning off the Reverse Beep with the Push Button
Using the steps below, you can also turn off the Reverse beep sound on your Kia Sorento with the push button.
Step #1: Locate the Push Button
If you own a newer Kia Sorento model (2018-2022), look for the “P” symbol button on the central console.
Step #2: Disable Reverse Noise
With your SUV running, press and hold the P button for one to three seconds to manually turn off its reverse beeper beep.
Note: If you wonder why your Mazda CX-5 beeps when you lock it, head to this guide.
How To Fix the Kia Sorento’s Continuous Beeping Issue?
If the Kia Sorento’s reverse beep keeps going on for a long time and you can’t figure out how to fix it, here is all you need to do to stop the irritating beeping noise.
Fix #1: Clean Your Sensor
Sometimes, beeping occurs because a parking sensor is covered in dirt or other particles, such as ice. Cleaning the sensor will improve its functioning, thus stopping the beeping sound altogether and making life easier.
Fix #2: Replace Sensor
Replacing your sensor could be in order if cleaning fails and the beeping continues. Just like batteries wear out over time, sensors may wear down, too. Let a Kia expert take a look to assess whether you require new ones.
Fix #3: Repair Wiring
Just imagine what would happen if all the wires on your computer became mixed up. You wouldn’t expect anything good to come of it. The same applies to car parking sensors. When wires become disorganized, they may start acting weird. A Kia mechanic can repair those wires so your parking sensor becomes functional again.
What Are the Costs Involved With Fixing My Reverse Sensor Beeping?
One thing that might stop you from replacing your Kia Sorenot’s reverse sensors is their cost. Typically, new reverse sensors for Kia vehicles can cost approximately $125, while labor rates could range anywhere from $88-$11 depending on which Kia model and location your repair takes place in.
So, if you can get the sensor repaired, that would work well, but if you are left with no other option, replacing them with new ones would save many expenses later on.
This is all about turning off the Reverse Beep on Kia Sorento. In this guide, I have explained why you hear the reverse beep on your Kia Sorento and provided two simple methods to turn it off.
This guide also explored some fixes for the continuous beeping sound from your Kia Sorento and highlighted the replacement cost. Hopefully, all your concerns regarding the reverse beep on your Kia Sorento are clear now, and the next time you hear your car beeping, you won’t panic and know exactly what to do next!